How to turn off the alarm on a, Bush DAB/FM Portable Radio NE-3116 Works but Display Blank

If your Bush DAB/FM Portable Radio NE-3116 is functioning but the display is blank, you can still attempt to turn off the alarm using the following general steps:

**Locate the Alarm Button:** Look for buttons labeled "Alarm," "Alarm Set," or similar on the radio. These might be positioned on the front panel or as part of the dial controls.

**Press the Alarm Button:** If your radio has an "Alarm" button, press it to cycle through the alarm settings. You may need to press it multiple times to reach the off setting.

**Use the Adjust Knobs or Buttons:** If there are knobs or buttons for adjusting the time or settings, you can try rotating or pressing them to see if they change the alarm status.

**Power Cycle the Radio:** Sometimes, simply turning off the radio and removing it from the power source (if it has batteries, remove them) for a few minutes can reset any settings, including the alarm.

**Refer to the Manual:** If you have access to the user manual, you may find specific instructions on how to turn off the alarm without a display. If you do not have the manual, you can usually find it online by searching for your model number.

**Contact Support:** If nothing works, consider reaching out to Bush customer support for assistance, especially if the radio is under warranty.

If the radio is still operational but the display is not working, it could be a sign of a defect, and you may want to explore repair options if the problem persists.